ENTER WITH CONFIDENCE
Doorway & Barrier Solutions You Can Trust

Arrange a site visit

Free Call: 1800 010 221

Blank 2500 x 1250 (1)-1

Projects

We are an Australian manufacturer, providing door and barrier solutions and services for a range of industries throughout Australia. Our operations span a range of sectors including; manufacturing, retail, residential and apartments, cold storage, automotive, health, food and beverage, logistics, milling and grain and more.

Filter Projects by:

Rapid Door installation for Mushroom grower - VIC

PRODUCTS USEDTranssprint-C Bi-Parting Doors

Remax were contacted by one of Australia’s largest grower, packer and marketer of premium quality fresh fruit and vegetables including Berries, Mushrooms, Tomatoes, Citrus, Grapes, Bananas and Avocados where their produce is supplied to all the major Australian supermarket chains, as well as independent grocers and a range of food industry stakeholders.

This grower also exports produce to Asia, North America and Europe with 3,000ha of farmed land across Australia, 20ha under protected glasshouse production and more than 40 farming, wholesale market and distribution operations nationally.

 Mushroom_Grower_1_Small.jpg

PROJECT OVERVIEW

With farms located around Australia, the mushroom grower supplies farm-fresh quality mushrooms within 24 hours of harvest and they have full control of their entire growing and distribution which means they can guarantee access to fresh, quality mushrooms 52 weeks of the year. 

The client required two doors on-site at Mernda, VIC, for access to their production / packing room from the moisture controlled mushroom growing area. This area, in between where the mushrooms are grown to where they are packed, is controlled with an airlock zone where a Transsprint-C B-Parting door was installed on one end and a previously installed Movidor High Speed Rapid Door at the delivery-end of the airlock area. 

The Transsprint-C Bi-Parting door was chosen to help prevent moisture and condensation build-up on the existing Movidor Rapid Door.

The client ordered a Bi-Parting Door due the fact that it bi-parts to the sides, where the impact of overhead dripping liquid from condensation is reduced, therefore reduced contamination onto products being moved through the doorway. With Bi-Parting doors, forklift drivers may also use the complete height of the door for moving products, with less overhead equipment to worry about.

The Transsprint-C Bi-Parting High Speed Roll Door opens with a speed of up to three meters per second and is, therefore, one of our fastest bi-parting High-Speed-Doors. It is suitable for interior use as well as exterior use for doorways up to 6000mm High and Wide

The main purpose of the bi-parting door in this particular case is to create a hygienic, efficient, barrier to prevent contamination of produce.

Further advantages: For passenger traffic a partial opening can be programmed. For even more safety, a light barrier and two safety edges are standard.

Watch our Promotional Product Video on YouTube below of the Transsprint-C Bi-Parting Door:

 

 

You may also be interested in our flexible yellow poly-bollards for protecting your door frame. Visit our products page for more information.

KEY REQUIREMENTS

  • Ultra high speed operation
  • Hygienic bi-parting operation; no contact with floor and no dripping moisture/condensation onto food transported through opening.
  • Large visibility
  • Separate moisture controlled zone from remaining production area.
  • Provide a durable, easy to clean finish.
  • Provide durable segregation solution.

PRODUCT OPTIONS

Width: (CW) max and Height (CH) max: 6000mm.

Emergency Opening: Door can be manually opened after power loss.
Optional: Automatically opening after power loss.

Curtain Colours:
RAL 1018 Zinc yellow
RAL 2004 Pure orange
RAL 3002 Carmine red
RAL 5010 Gentian blue
RAL 7038 Agate grey.

SCOPE OF WORKS

1. Design Consultancy and Planning
2. Made to measure fabrication of Bi-Parting Door
3. Bespoke fabrication of customised steelwork
4. Delivery and Installation

PROJECT IMAGES

Bi Parting rapid door Bi parting rapid door

Bi-parting rapid door Mushroom grower rapid doors

Mushroom_Grower_5_Small.jpg

For more information on Transsprint-C Bi-Parting Rapid Doors, have a look here >>


You May Also Be Interested In:

Flexwall installation at Linpac Packaging Facility: a new food industry Flexwall installation providing effective segregation from warehouse / delivery area from the production area. See images below and click here to read about the full project >>

Flexwall partitioning Remax Flexwall and Movidor

Wilson Transformers: Remax were contacted with regards to the facility in Wodonga where Wilson Transformer Company needed to separate the clean room / sheet processing area (where new high-tech laser and CNC machines were located which require a clean environment) from the general production area and welding bays. The clean room area recently also had a new brake press installed, as part of an upgrade and modernisation programme. Read More...

Warehouse Flexwall_Wilson Transformers_before and after_website.jpg

 

Topics: rapid doors, dust control, clean rooms, transsprint-c, bi-parting door, moisture control, cross contamination reduction, consensation, mushroom grower, Location - Australia, VIC, Sector - Food and Beverage Processing, P - Rapid Doors, Sector - Fruit & Vegetable

Notify me of new projects

Latest Projects

Projects by keywords