ENTER WITH CONFIDENCE
Doorway & Barrier Solutions You Can Trust

Free Call: 1800 010 221

Warehouse Management Blog

3 Smart Ways to Control Your Cold Storage Costs and Carbon Footprint

Insulated Doors
Some Australian cold storage businesses are reporting that with the carbon tax and increasing electricity network charges, their energy costs account for up to 30% of their earnings before interest, taxes, depreciation and amortisation. To compound this, electricity prices are expected to rise a further 5% a year. This means cutting energy consumption needs to be even more of a focus for cold storage businesses across Australia. With this in mind we have outlined 3 key tips to help you reduce your cold storage costs.

1. Variable-Frequency Drives

Variable Frequency DrivesThese devices control AC motor speed and torque by varying the input frequency and voltage. In cold storage they can be used on compressors, evaporators and condensers. By adding a VFD to your compressor you no longer need to rely on a slide valve to control capacity. A VFD allows you to set the capacity of the compressor at anywhere between 0 and 100%, allowing you to avoid the energy wastage involved in using the slide valve or continuously working the compressor at maximum speed.

The same advantages of control exist for condenser and evaporator fans. While it used to be the precision of an “on” and “off” switch, you can now have an accurate measurement that matches the needs of your cold storage space.

Interstate Cold Storage is one of the 25 largest cold storage warehousing companies in the US. They recently implemented VFDs in in their Fort Wayne facility as a preliminary energy saving tactic. Within the first six months the investment had already paid for itself and they reported electrical energy consumption savings of 35%. This experience convinced them to roll out the technology at their 4 remaining locations immediately.

VFDs allow you to set your fans to the optimum speed not the maximum speed, saving on unnecessary overwork of the fan; both in energy savings and reduced wear. The reductions in fan speed are cubed at the cost end as a result of the affinity laws, where the power used to power a fan is proportional to the cube of the fan speed. This means that a fan operating at 50% speed will draw on a minimum of 12.5% of its power, with a little bit more for inefficiencies. This reduces cost dramatically, and these savings are further compounded by the decrease in heat emissions from the fan as it decreases in speed reducing load on the refrigeration system.

2. Lighting

This blog has addressed lighting as a major cost saving opportunity for standard warehouse operations in the past but lighting for cold storage provides further challenges and chances for savings. Lighting counts for approximately 12% of the total energy consumption of a cold storage plant. To further this, traditional sodium or metal halide lights use heat to create their light and this heat has to be removed by your refrigeration plant, intensifying your costs. Traditional floodlights use around 400 Watts each, an exorbitant amount when compared to the superior option of 120W to 150W LED  lights. In addition to drawing less power LED’s also address two other problems of traditional lighting methods.

LED Lighting Solutions

Firstly they fulfil their primary function for your cold storage warehouse more adequately by providing a cleaner light with better illumination and less shadows in your cold storage warehouse. Secondly they produce a miniscule amount of heat and only around the power supply and contact point of the silicon chip. The reduced heat load on your refrigeration helps cut energy costs and drives savings up to 80% on traditional lighting options. 

They also provide a further benefit of being more carbon neutral and more reliable. With failures being much less common in LED lights than traditional ones. Their longevity reduces the waste of disposing dead bulbs, this coupled with the power savings and lowered waste heat makes them a product that is both sustainable and superior.

3. Improvements in Door Design

The largest heat load on a cold storage facility is through heat infiltration and leakage or loss of refrigerated air to the atmosphere. The first solution every warehouse should employ is reducing the number and size of doors from your facility. By having a minimum number of possible portals to the outside you reduce leakage and chance of infiltration. By having smaller doors you decrease the exchange space when the door is open. It is possible to order custom warehouse doors to be fitted to your facility and this will ensure you get the correct size.

You should also consider the average opening time and if this can be reduced in anyway. High-speed freezer doors are a solution to this problem. They offer high insulation and quick open and close times. Having well insulated doors is crucial to not allowing heat infiltration when the door is closed. You should be considering R values of 4 and above for maximum performance. A few options manufactured here in Australia include:

Thermal Door: Insulation Value:
Compact Sectional Door Insulation value EN12428, Panel U=0.76W/m2K
Movichill High Speed Freezer Door R-Value: 0.6m2K/W
Movidor Thermic Rapid Door 4 W/m2.K
Ulti-Flex Bi-Parting Door R Value of R4.4 (USA-R25)

Also consider biparting doors for added speed and space saving, heated seals to stop freezing and icing on the doorway and the doors ability to flex and withstand impact.

Insulated Doors

Those are your basic options for reducing heat ingress and refrigerated air loss but there are some other methods available too. Ideally you should be conducting your product reception and load-outs in a refrigerated loading dock and pallets should be transported via a conveyor belt through minimum sized portholes in the chamber walls. You should also aim for pallet movements inside to be conducted by automated cranes or forklifts. At the very minimum you should be employing PVC strips or panels between any segregated temperature zones.

When a cold storage door is open to a refrigerated zone the cold dense air typically rolls out the bottom and warm air rushes in the top to fill the drop in pressure. The use of desiccant systems to suck in air at the top of an open door dehumidify it and then insert it into the refrigeration system is a good move in reducing the heat load on your cold storage and the other problems associated with high humidity.

The final strategies you can employ involve the seals of your doors. You should attempt to put airlocks on all personal access routes and forklift ramps. A tight seal should be employed with any cold storage door and the key element of this involves stringent maintenance policies checking for any wear on door seals. As already mentioned heated seals for doors will prevent ice forming and rendering the door ineffective, it will also lower maintenance costs, increase safety by providing a dry floor and increase the lifespan of evaporators.

These are just a few ways that you can reduce costs in your warehouse. If you are interested in more in depths tips for how to reduce energy costs and your carbon footprint please click here. Or if you would like to see if your doors are helping you keep your costs down please take our door performance checklist by clicking on the link below.

Free Checklist: Door Condition Report

Topics: cold storage, custom warehouse doors, insulated doors, cold storage doors, carbon footprint, movichill

Subscribe to Warehouse Management Articles

Subscribe to our Monthly 'Best of Blogs' email update

Latest Posts

Posts by category